Suncast hose reel o rings

Description

PLEASE NOTE: ANY THING PURCHASED BETWWEN 9/27 TO 10/2 WILL NOT SHIP UNTIL 10/4 DUE TO A VACATION!
Does your hose reel leak? This is what you need to fix it. You will need 2 o rings. One o ring is just a little bigger than the other. I will included 2 of each, so you can repair your reel 2 times. These will fix models: STA100, SWA100, STA100J, STA125B and MJT60DT. This is a very easy reel to fix. Below you will find the instructions to disassemble the hose reel and replace the leaking orings. Also this will fix models HRP60 and HRP60B. I have never disassembled these reels. You will be on your own. Thanks for looking!
Suncast hose reel
1) turn off water to reel
2) remove plastic clip
3) remove reel , this should pull off pretty easy, if not use a flat blade screw driver
4) remove o rings,   please notice the size difference, the larger one goes on the base of the shaft, the smaller one goes on the end, you can use a pair of needle nose pliers
5) clean o ring placement
6) use some o ring lube,
USE ONLY 100% Silicone Grease
around the rings
7) install the o rings
8) replace reel and clip
***
USPS is experiencing significant delays across their delivery network.
Posted with
eBay Mobile